Indyme Precisely Identifies Circuit
Board Defects Using Corelis Boundary-Scan Advanced Diagnostics
Indyme Solutions, Inc. has been the leader of modern retail communications solutions for the last 20 years. Whether a shopper needs assistance, a cashier requires managerial support, or a security door is unexpectedly opened, relaying information to the appropriate personnel is critical to ensure a rapid response. Managing multiple communication channels is no simple task—it requires a robust central communications platform with reliable hardware backing.
Indyme’s Connect™ platforms provide the backbone for a versatile event response system. Using Connect Start™, Connect LX (CLX), or Indyme’s Connect™ Enterprise Management software, retail providers can conveniently manage and process alarm triggers from thousands of sources via a centralized system. Those alarm triggers can then be automatically dispatched to a variety of electronic notification devices such as mobile computers, PDAs, wireless phones, two-way radios, and in-store PA systems.
As Indyme developed newer generation products, the design engineers started using space saving techniques, including the use of small form factor surface mount and Ball-Grid-Array (BGA) electronic devices. This resulted in a more complex manufacturing process and presented new test challenges. To meet these new challenges, Indyme standardized on boundary-scan structural testing for their Printed Circuit Assemblies (PCA).
Indyme chose Corelis boundary-scan tools to execute their high volume go/no-go production testing and programming. By taking advantage of Corelis’ ScanExpress Runner GANG system, Indyme was able to realize much higher throughput during production runs, allowing them to manufacture and test products at a pace to match growing product demand.
During a recent production run, a significant number of unexpected failures were coming off the line. Investigation into the problem showed that not all boards were defective, but enough to indicate a deeper, intermittent problem was evident.
"Indyme was experiencing a high failure rate with our Connect Start PCA during early production tests," explained Indyme’s Manufacturing Engineering Manager, Bob Wendt.
"The boundary-scan tests confirmed failures on those units."
Initially, Indyme attributed the failures to a particular BGA device on the PCA that had a history of problems in manufacturing. Reflowing several suspect components was met with mixed success.
"It was clear that we were hitting the right spot, but we had not found the root cause," said Bob.
"Our existing production tests could not directly identify the problem and the
high number of faults were adding significant cost to the manufacturing and
repair processes. Our interim resolution of replacing expensive parts was less
Bob opted to add Corelis’ unique Advanced Diagnostics (ADO) module to their existing system to inject diagnostic visibility into the problem.
"We had been primarily using Corelis tools for high volume go/no-go decisions as well as chip programming," stated Bob.
"However, this set of circumstances required a tool that could help identify the root cause of our problem. Luckily Corelis
already had a software module with this capability."
Once installed, ScanExpress ADO was able to quickly and accurately identify the fault down to the pin and net level, leading debug efforts by the manufacturer straight toward one particular Plated Through-Hole (PTH) in the PCA. Cross sectional photos of the PTH were taken, revealing poor copper plating due to excess drilling residue. With the source of the problem now identified, action was taken to update the manufacturing process, ultimately resulting in improved yields.
"Corelis boundary-scan with ScanExpress ADO really saved the day by identifying these early stage production problems. It quickly identified the issue so that we could take corrective action," claimed Bob.
"With just this one fault identification, the Corelis boundary-scan tools provided a return on our investment far beyond expectations. If you have BGA
parts in your product, boundary-scan is a requirement. It isn’t really an option
if you’re serious about testing."
Corelis, Inc., a subsidiary of Electronic Warfare Associates, Inc., offers bus analysis tools, embedded test tools, and the industry’s broadest line of JTAG/boundary-scan software and hardware products combining exceptional ease-of-use with advanced technical innovation and unmatched customer service. Corelis’ development and test tools are used by companies such as Agilent, Dell, IBM, Intel, Microsoft, Lockheed Martin, Rockwell Collins, Hewlett-Packard, Motorola, Qualcomm, Nokia, Panasonic, TI, Ford, Broadcom, Ericsson, and many others. Corelis products are found globally in every industry developing or manufacturing electronic products.