Blackhawk USB2000 JTAG Emulator

The Blackhawk USB2000 Controller is a small and lightweight controller designed for the unique requirements of the Texas Instruments TMS320C2000 DSP developers.

Built upon the advanced technology of the highly-popular USB510, this third generation controller achieves the cost/performance balance required by the C2000 development community. The compact controller pod requires no external power source. Power is derived directly from the PC’s USB port.

The controller supports the standard 14-pin JTAG header and voltage ranges from 3.3v to 5.0v. The USB host port permits communications with the host PC and the bi-color status LED gives visual indication of the controllers state.

A free add-on to the USB2000 Controller is the Blackhawk FlashBurn utility. This scriptable utility follows the freely available Texas Instruments API and algorithms for programming C2000 devices with on-chip flash. BHFlashBurn integrates seamlessly with the Flash API allowing the ability to Clear, Erase, and Program on-chip flash on the target device.

Blackhawk also has available an optional Isolation Adapter which protects from ground loop voltage, harsh environments and new, untested designs. Supports 3.3v-5.0v targets with TI 14-pin connections.

Features

Super Low-Cost XDS510™-class Controller.
Plug n’ Play USB Host Interface.
Bus powered, no external power required.
Windows® Plug n’ Play Installation.
Supports TI C2000 Digital Signal Processors:
- F283x
- F281x
- F280x
- F280xx
- LF240x
3.3/5.0 volt device I/O support.
Bi-Color Status LED (red/green).
Code Composer Studio v3.3 support.
Standard 14-pin JTAG Header Connector.
Blackhawk FlashBurn utility add-on.
Optional Isolation Adapter available.

Benefits

Inexpensive Alternative
Easy to Install
Compact, simple and reliable
Will not need to be replaced for updated DSPs
Visual Indicator shows status continuously
Add-on's and Options for a small investment

Applications

Audio, Automotive, Broadband, Communications, Telecom, Computers & Peripherals, Consumer Electronics, Industrial, Medical, Military, Security, Video and Imaging, Wireless.

System Requirements and Compatibility

Please visit http://www.blackhawk-dsp.com/products/USB2000.aspx#system_req

In the Box

JTAG Emulator
6' (2m) USB Cable
Installation CD
Quick Start Guide
Product Warranty Terms and Conditions

Blackhawk™ USB2000 Controller

Part No.: BH-USB-2000

http://www.blackhawk-dsp.com/products/USB2000.aspx

About Blackhawk


	Blackhawk™ was the first to introduce a USB JTAG Emulator for Texas Instruments DSP’s and is a member of the Texas Instruments Third Party Developers Network.

Need Assistance?

If you would like assistance with implementing JTAG testing in your design, or you are simply short of resources, our talented and experienced engineering staff can help you with all your JTAG needs.