Corelis Europe
                         
   
Bringing You High Performance...
 
 

JTAG Boundary-Scan Controllers

   
   
 

Home > Products > JTAG Boundary-Scan Products > JTAG Test and Programming Hardware > JTAG Controllers for High-Volume Production Systems > ScanTAP Remote Intelligent Pod

         
 


ScanTAP Remote Intelligent Pod

Apply test vectors and/or ISP patterns to target boards with a variety of JTAG chain topologies.

The test patterns generated by the PCI-1149.1/Turbo controller are distributed to the target system either directly through ScanTAP 4, ScanTAP-8, and ScanTAP-32 pods. The ScanTAP-4, ScanTAP-8, and ScanTAP-32 pods can apply test vectors and/or ISP patterns to target boards with a variety of JTAG chain topologies. In the simplest case, the ScanTAP-4, ScanTAP-8, and ScanTAP-32 will provide the interface between the PCI-1149.1/Turbo controller and a target system consisting of a single JTAG Test Access Port (TAP). This would be the case where the target system consists of one JTAG chain and its single associated TAP.

If the board under test consists of groups that include multiple devices, each with their own respective TAP, then the ScanTAP-4, ScanTAP-8, and ScanTAP-32 allow for test vectors to be applied to each of the target TAPs individually, one TAP at a time, or jointly to all of the TAPs.

Note that the concept of concurrency here not only applies to the simultaneous application of test vectors and ISP patterns to each board but also applies to the simultaneous verification of each individual board. A failure on any of the individual boards will be properly logged and will not prohibit the continuation of testing on the remaining boards. The concurrent or gang mode of operation offers great performance increases when testing, in-system programming, and verifying multiple targets.

To speak with a Sales Engineer, please click here.

 

Diagrams

Connecting ScanTAP-4 to a UUT with Four TAPs
Connecting ScanTAP-4 to a UUT with Four TAPs

Connecting ScanTAP-4 to Four Identical Boards
Connecting ScanTAP-4 to Four Identical Boards

Connecting ScanTAP-32 to 32 Identical Boards
Connecting ScanTAP-32 to 32 Identical Boards

 


Related Controllers

NetUSB-1149.1/E JTAG Controller
NetUSB-1149.1/E
NetUSB-1149.1/SE JTAG Controller
NetUSB-1149.1/SE
PCI-1149.1/Turbo JTAG Controller
PCI-1149.1/Turbo
PCIe-1149.1 JTAG Controller
PCIe-1149.1
CPXI-1149.1/Turbo JTAG Controller
CPXI-1149.1/Turbo
ScanTAP Remote Intelligent Pod
ScanTAP-4/8/32
Remote Intelligent Pod
     

 

     


(hover to magnify)


(hover to magnify)


(hover to magnify)

 

Use with:

ScanExpress Runner

For Low Volume Production

 

ScanExpress Runner

For High Volume Production




Need Assistance?

 
  If you would like assistance with implementing JTAG testing in your design, or you are simply short of resources, our talented and experienced engineering staff can help you with all your JTAG needs. Request Help

Need Assistance

* Name:
* Company:
* City:
* State/Country:
* Phone:
* Email:
Contact me by:

Inquiring About:

Additional Comments:
Need other contact information?  Click Here
 
 

 

 
   
JTAG Products

JTAG Products

JTAG Interconnect, ISP, and Functional Test Solutions

Bus Analyzers

Bus Analyzers

I2C and ARINC-629 Bus Analysis Solutions

Engineering

Engineering

Request DFT Reviews, Test Procedures, and Turn-Key Solutions

Education

JTAG Education

Whitepapers, Demos, Tutorials, and Design Tips

 

Copyright Corelis 2017.  All rights reserved.

Privacy

Sitemap EWA Technologies Blackhawk DSP EWA Corporate Contact Corelis Europe