Corelis Europe
                         
     
 

JTAG Boundary-Scan Hardware

 

Contact Corelis Sales

 
   
   
 

Home > Products > JTAG Boundary-Scan Products > JTAG Test and Programming Hardware > JTAG Controllers for High-Volume Production Systems

         
 


JTAG Boundary-Scan Controllers for High-Volume Production Systems

Hardware Based Parallel Operations

Corelis has designed special hardware that autonomously performs concurrent (gang) testing and programming of multiple units without additional user intervention. The entire testing and programming, including on-the-fly verification of results, is done in modular and expandable hardware.

Modular Hardware Matrix

The major hardware elements of this system include:

Interface

Model

TAPs

TCK Speed  
USB 2.0 & Ethernet NetUSB-1149.1/E

4

80 MHz

NetUSB-1149.1/E JTAG Controller

NetUSB-1149.1/E

NetUSB-1149.1/E JTAG Controller

The NetUSB-1149.1/E (4 TAPs) is an advanced USB 2.0 and LAN-based controller that can be used in the testing and/or in-system programming (ISP) of devices, boards, or systems compliant with the IEEE-1149.1 standard. The NetUSB-1149.1/E controller supports concurrent (gang) testing and in-system programming of CPLDs and Flash devices at TCK rates of up to 80MHz. Up to 512 boards can be tested and programmed concurrently!

The controller connects to the computer either through the USB interface or LAN interface for easy installation at nearby or remote locations. Other features include automatic signal delay compensation for long cable lengths to the UUT, TAP signals, and GPIO discrete signals which are individually programmable from 1.25V to 3.3V, programmable slew rate control and pre-power up test for shorts between power and ground traces on the UUT.

For complete information on these two controllers, please refer to the detailed datasheets.

Download NETUSB-1149.1/E Datasheet

USB 2.0 & Ethernet  NetUSB-1149.1/SE

8

70 MHz

NetUSB-1149.1/SE JTAG Controller

NetUSB-1149.1/SE

NetUSB-1149.1/SE JTAG Controller

The NetUSB-1149.1/SE (8 TAPs) is an advanced USB 2.0 and LAN-based controller that can be used in the testing and/or in-system programming (ISP) of devices, boards, or systems compliant with the IEEE-1149.1 standard. The NetUSB-1149.1/SE controller supports concurrent (gang) testing and in-system programming of CPLDs and Flash devices at TCK rates of up to 80MHz. Up to 512 boards can be tested and programmed concurrently! The NetUSB-1149.1/SE also supports an analog voltage measuring capability.

The controller connects to the computer either through the USB interface or LAN interface for easy installation at nearby or remote locations. Other features include automatic signal delay compensation for long cable lengths to the UUT, TAP signals, and GPIO discrete signals which are individually programmable from 1.25V to 3.3V, programmable slew rate control and pre-power up test for shorts between power and ground traces on the UUT.

For complete information on these two controllers, please refer to the detailed datasheets.

Download NETUSB-1149.1/SE Datasheet

PCI PCI-1149.1/Turbo

4,8 or 32 (*)

80 MHz

PCI-1149.1/Turbo JTAG Controller

PCI-1149.1/Turbo

PCI-1149.1/Turbo JTAG Controller

The PCI-1149.1/Turbo is a powerful PCI-based controller that is used for testing and in-system programming (ISP) of devices, boards, or systems compliant with the IEEE-1149.1 standard. When combined with a pod, such as the ScanTAP-4, the PCI-1149.1/Turbo supports concurrent (gang) testing and in-system programming of CPLDs and Flash devices at TCK rates of up to 80MHz. The Controller connects to the pod with a high performance SCSI ribbon cable available in lengths up to 30-feet for easy installation at remote locations.

Other features include automatic signal delay compensation for long cable lengths to the UUT, TAP signals, and GPIO discrete signals which are individually programmable from 1.3V to 3.3V, programmable slew rate control, and pre-power up test for shorts between power and ground lines on the UUT.

Download PCI-1149.1 Datasheet
Download PCI-1149.1 Turbo Datasheet

PCI Express PCIe-1149.1

4,8 or 32 (*)

80 MHz

PCIe-1149.1 JTAG Controller

PCIe-1149.1

PCIe-1149.1 JTAG Controller

The PCIe-1149.1 is an advanced robust system that can be used in the testing and/or in-system programming (ISP) of devices, boards, or systems compliant with the IEEE-1149.1 standard. When combined with a pod, such as the ScanTAP-4, the PCIe-1149.1 supports concurrent (gang) testing and in-system programming of CPLDs and Flash devices at TCK rates of up to 80MHz. The Controller connects to the pod with a high performance SCSI ribbon cable available in lengths up to 30 feet for easy installation at remote locations. 

Other features include automatic signal delay compensation for long cable lengths to the UUT, TAP signals and GPIO discrete signals which are individually programmable from 1.3V to 3.3V, programmable slew rate control and pre-power up test for shorts between power and ground lines on the UUT.

Download PCIe-1149.1 Datasheet

PXI/cPCI CPXI-1149.1/Turbo

4,8 or 32 (*)

80 MHz
CPXI-1149.1/Turbo JTAG Controller

CPXI-1149.1/Turbo

CPXI-1149.1/Turbo JTAG Controller

The CPXI-1149.1/Turbo is an advanced PXI/cPCI-based controller that is used for testing and in-system programming of devices, boards, or systems compliant with the IEEE-1149.1 standard. When combined with a pod, such as the ScanTAP-4, the CPXI-1149.1/Turbo supports concurrent (gang) testing and in-system programming of CPLDs and Flash devices at TCK rates of up to 80MHz. The controller connects to the pod with a high performance SCSI ribbon cable available in lengths up to 30-feet for easy installation at remote locations. Other features include automatic signal delay compensation for long cable lengths to the UUT, TAP signals, and GPIO discrete signals which are individually programmable from 1.25V to 3.3V, programmable slew rate control, and pre-power up test for shorts between power and ground traces on the UUT.

Download CPXI-1149.1/Turbo Datasheet

PCI ScanTAP-4 Remote Intelligent Pod 4  
ScanTAP-4 Remote Intelligent Pod

ScanTAP-4 Remote Intelligent PodScanTAP-4 Remote Intelligent Pod

Connecting ScanTAP-4 to a UUT with Four TAPs
Connecting ScanTAP-4 to a UUT with Four TAPs

Connecting ScanTAP-4 to Four Identical Boards
Connecting ScanTAP-4 to Four Identical Boards

PCI ScanTAP-8 Remote Intelligent Pod 8  
ScanTAP-8 Remote Intelligent Pod

ScanTAP-8 Remote Intelligent Pod
ScanTAP-8 Remote Intelligent Pod

 
PCI ScanTAP-32 Remote Intelligent Pod 32  
ScanTAP-32 Remote Intelligent Pod

ScanTAP-32 Remote Intelligent Pod
ScanTAP-32 Remote Intelligent Pod

Connecting ScanTAP-32 to 32 Identical Boards
Connecting ScanTAP-32 to 32 Identical Boards

 

     

ScanExpress - Volume Production Tester  and In-System Programmer


Corelis Software/Hardware Flowchart

Diagram of ScanExpress Software
ScanExpress JET or TPG with Runner and optional software packages
This diagram represents how ScanExpress software works together in providing a solution optimally geared according to your needs.  Click on the diagram to visit individual software/hardware pages, or use the links below.

  • ScanExpress TPG
  • ScanExpress JET
  • ScanExpress DFT Analyzer
  • ScanExpress Merge
  • ScanExpress Runner
  • ScanExpress Runner Gang
  • ScanExpress ADO
  • ScanExpress RunnerClick
  • ScanExpress Viewer
  • ScanExpress Debugger
  • ScanExpress Programmer
  • ScanExpress Flash Generator



  • Use with:

    ScanExpress Runner

    For High Volume Production

     



    Need Assistance?

     
      If you would like assistance with implementing JTAG testing in your design, or you are simply short of resources, our talented and experienced engineering staff can help you with all your JTAG needs. Request Help

    Need Assistance

    * Name:
    * Company:
    * City:
    * State/Country:
    * Phone:
    * Email:
    Contact me by:

    Inquiring About:

    Additional Comments:
    Need other contact information?  Click Here
     
     

     

    to top

     

     
       
    JTAG Products

    JTAG Products

    JTAG Interconnect, ISP, and Functional Test Solutions

    Bus Analyzers

    Bus Analyzers

    I2C and ARINC-629 Bus Analysis Solutions

    Engineering

    Engineering

    Request DFT Reviews, Test Procedures, and Turn-Key Solutions

    Education

    JTAG Education

    Whitepapers, Demos, Tutorials, and Design Tips

     

    Copyright Corelis 2012.  All rights reserved.

    Privacy

    Sitemap EWA Technologies Blackhawk DSP EWA Corporate Contact Corelis Europe